K-Series Press
D SERIES AT A GLANCE APPLICATIONS
  • Custom tonnage and bed length configurations are available
  • 150 - 2000 ton standard models
  • Standard sizes from 6’ X 3’ - 16’ X 6’
  • Two-point down-acting design
  • Heavy column construction
  • Deep drawing
  • Progressive and transfer dies
  • Blanking
  • Compression molding of thermoset, thermoplastic and advanced composite materials
D Series Straight Side Hydraulic Presses offer extensive application versatility, enabled through the equipment’s overall design, as well as large bed area, generous open heights and long working strokes. D Series presses are most appropriate for high tonnage applications requiring use of the equipment’s large platen/bolster area. This is the only press that provides the off-center load characteristics of a 2-point mechanical press.

STANDARD FEATURES

  • wide opening d and m seriesWide Column Openings allow easy access to the die area and enable continuous coil-feeding operations
  • wide opening d and m seriesLarge Double-Acting Cylinders provide support to cushion breakthrough shock of heavy plate punching and offer improved punch quality and longer die service life. Cylinders are synchronized with twin linear electronic scales which identify out-of-level-conditions as small as +/-.001”
  • square-type gibbing4-Column 8-Way Gibbing Construction for High Precision Application includes proportional electronic leveling to ensure maximum bearing contact with long non-metallic gib surfaces. Gib clearance adjustments are made without special tools quickly and easily.
  • plc interface control 1plc interface control 2PLC Interface Controls are employed for all press timing and sequence functions. Controls are pendant-mounted and reduce set-up time with maximum flexibility. The Allen Bradley HMI allows operators to program tonnage directly through the control. Nitrogen dies can be run up to 35% of maximum press capacity. Other control systems are also available as options.
  • stacked valvesCartridge “Stack Valves” maintain safe and reliable control of the press slide. Our stacked valve design provides fast response, minimum heat build-up, and requires less piping and fittings to simplify maintenance and troubleshooting.
  • Interlocking Wedge Keys connect the reinforced bed to the columns, helping to transmit forces more effectively than bolts, tie
  • Large Removable Bed Bolster utilizes a single center-located die cushion (optional) to perform a wide range of draw work with a large pressure pad area. The bolster can be machined with holes for scrap and piece part removal with scrap chutes and conveyor systems.
D-Series Stamping Press

OPTIONAL FEATURES

  • Higher Speed Hydraulic Packages
  • Increased Stroke Lengths
  • Increased Open Heights
  • Increased Feed Window Sizes
  • Quick Die Change Systems
  • Die Cushions
  • Hydraulic Knock-Outs
  • Coil-Feeding/Handling Systems
  • Larger Bed/Bolsters
  • Specially-Machined Bolsters and Slides
  • Additional Operator Stations
  • Continuous Run Operation
  • Flush Floor Mounting
  • Safety-Enhancing Optional Features, including light curtains, barrier guards, two-hand controls, and slide safety blocks
  • Slide Locks
  • Shock Dampers

DETAILED SPECIFICATIONS

Tonnage 150 200 300 400 500 600 750 1000 1250 1500 2000
Stroke 18 18 18 18 18 18 24 24 24 36 36
Open Height 30 30 33 33 36 36 42 42 42 54 54
Closed Height 12 12 15 15 18 18 18 18 18 18 18
Distance Between Slideways 76-124 76-124 76-148 76-148 75-171 75-171 99-195 123-195 123-195 123-219 123-219
Slide Opening (F to B x Top to Bottom ) 18 x 32 18 x 32 20 x 35 20 x 35 20 x 38 22 x 38 21 x 44 29 x 44 29 x 44 39 x 56 39 x 56
Machine Height 131 139 153 158 176 178 200 209 246 285 330
Machine Width 97- 145 99- 147 103- 175 105- 177 107- 203 107- 203 134- 230 162- 234 166-238 144-240 172-268
Machine Depth 38 40 47 49 51 53 55 67 71 86 88
Bed Projection Below Floor 11-16 13-22 21-36 22-39 25-51 31-50 40-65 57-70 58-72 60-79 62-81
Bolster Size (L to R x F to B) (1) 72-120 x 36 72-120 x 36 72-144 x 42 72-144 x 42 72-168 x 42 72-168 x 48 96-192 x 54 120-192 x 60 120-192 x 60 120-216 x 72 120-216 x 72
Bed Height Above Floor 41 41 41 41 41 41 41 41 41 41 41

1250, 1500, 2000 ton models, consult factory. All specifications in "inches" unless marked otherwise.

Speeds
Tonnage Speed Package Rapid Advance Fast Press Fast Press
Tonnage 		Normal
Press 		Normal
Return 		Fast
Return 		Motor
HP
150 LEVEL 1 382 183 40 57 117 367 30
LEVEL 2 506 242 40 85 174 486 50
200 LEVEL 1 362 171 60 53 107 340 40
LEVEL 2 498 235 60 77 156 467 60
300 LEVEL 1 362 134 80 41 70 221 40
LEVEL 2 498 184 80 60 101 303 60
400 LEVEL 1 352 131 100 39 64 216 50
LEVEL 2 468 174 100 63 106 287 100
500  LEVEL 1 319 107 130 35 56 169 60
LEVEL 2 437 148 130 61 97 231 100
600 LEVEL 1 301 114 185 38 64 193 75
LEVEL 2 368 140 185 63 107 236 125
750 LEVEL 1 257 100 250 38 66 172 100
LEVEL 2 316 123 250 61 105 211 150
1000 LEVEL 1 230 87 350 42 72 144 150
LEVEL 2 302 115 350 42 72 189 2X75
1250 LEVEL 1 202 74 400 36 60 121 150
LEVEL 2 265 98 400 36 60 158 2X75
1500 LEVEL 1 160 60 450 29 49 98 150
LEVEL 2 239 90 450 29 49 147 2X75
2000 LEVEL 1 129 45 600 22 35 70 150
LEVEL 2 194 67 600 22 35 105 2X75

1250, 1500, 2000 ton models, consult factory. All specifications in "inches per minute" unless marked otherwise

 




made in USA

Value Proposition